Vast Range of PRECISION TOOLS in This Section
<< Click Here to Go to Picture View Page >>
ENGINEERS STEEL SQUARE
SOLID ANGLE PLATES
CARPENTERS STEEL SQUARE
ENGINEER'S ADJUSTABLE STEEL SQUARES
BEVELLED EDGE STEEL SQUARES
CENTER FINDER SQUARES
CENTER FINDERS FOR ROUND BAR
STEEL RULES / FOOT RULES
POCKET RULES
ANGLE DEGREE PROTRACTOR(0 TO 180°)
PROTRACTOR WITH DEPTH GAUGE
DEPTH & ANGULAR GAUGES
BRASS DEPTH GAUGE  
CAT # For precision
CAT # For
NO. OF
SIZE
  
BORE GAUGE  
Ground Finish
Machined Finish
ROBS
INCH
MM
  
UNIVERSAL GRINDING GAUGE   GPA-7040A GPA-7049 0 1x1x1 25x25x25  
WIRE GAUGES   GPA-7041A GPA-7050 1 2x2x2 50x50x50  
TWIST DRILL GAUGE   GPA-7042A GPA-7051 1 3x3x3 75x75x75  
DRILL GAUGES   GPA-7043 GPA-7052 1 4x4x4 100x100x100  
SCREW CUTTING GAUGE   GPA-7044 GPA-7053 1 5x5x5 125x125x125  
CENTER GAUGE   GPA-7045 GPA-7054 1 6x6x6 150x150x150  
SCREW PITCH GAUGE / THREAD GAUGES   GPA-7046 GPA-7055 2 8x8x8 200x200x200  
RADIUS GAGUES   GPA-7047 GPA-7056 2 10x10x10 250x250x250  
RADIUS GAUGES RING TYPE   GPA-7048 GPA-7057 2 12x12x12 300x300x300  
THICKNESS GAUGES / FEELER GAUGES              
THICKNESS GAUGES / DIAMONDGAUGES              
MARKING GAUGE * Constructed from good quality seasoned casting.
SPRING CALIPERS :- * Properly hardened & ground from all the sides.
- FLAT LEG
 * Properly machined 90° square.

- SQUARE LEG
* Precision groundsides & ends.
- HIGH CARBON STEEL
  
- BLACK EPOXY FINISH
  
FIRM JOINT CALIPERS & DIVIDERS  
JEENY / HERMAPHRODITE CALIPERS  
WOOD WORKING CALIPERS
   
WING COMPASSES  
PENCIL COMPASSES / HOLDERS
ECONOMY VERNIER CALIPERS
BRASS VARNIER CALIPERS  
ECONOMY MICROMETERS
VEE BLOCKS :-  

-Steel V Block

  

-Cast Iron V Block

  

-Non Protruding V Block

-Stepped groove V Block

  

-4 Way V Block

  

-Toolmakers Ultimate V Block

  

-Versatile V Block

  

-Adj. Angle V Block 0-60°

  

-Magnetic V Block

  
V-ANGLE PLATE / VEE BLOCK  
CAST IRON SLOTTED ANGLE PLATES  
SOLID ANGLE PLATES  
STEP ANGLE PLATES  
SINE BARS  
V SHIN BAR  
SURFACE PLATE / CAST IRON  
SURFACE PLATES / GRANITE  
ENGINEER'S STEEL PARALLELS & SET  
ENGINEER'S SCRIBERS  
TOOLMAKER'S SURFACE MARKING GAUGE  
SURFACE GAUGE ROUND FIXED BASE  
MICROMETER STAND  
DIAL COMPARATOR STAND  
BENCH BLOCK  
WIGGLER & CENTER FINDER SET  
EDGE & CENTER FINDER  
DIE MAKER'S TOOL KIT OF 5 PCS  
ENGINEER'S MEASURING & MARKING SET 11PC  
PROFESSIONAL'S MEASURING TOOL SET OF 6PC  
MACHINIST'S MEASURING SET OF 3 PCS  
MACHINIST'S MEASURING SET OF 6 PCS  
ENGINEER'S TOOL SET OF 6 PCS  
ENGINEER'S STARTER SET OF 5 PCS  
 ENGINEER'S TOOL SET OF 7PCS