<< Click Here to Go to Picture View Page >>
BRAZED CARBIDE LATHE TURNING TOOLS
LATHE CENTER / DEAD CENTER - FULL
HSS LATHE TURNING TOOLS
HSS INVOLUTE GEAR CUTTERS
5% Co. BORING BARS
BRAZED CARBIDE BORING BARS
TURNING TOOL HOLDERS - AMERICAN
TURNING TOOL HOLDERS - ENGLISH
PARTING / CUT OFF HOLDERS
TURNING TOOL HOLDER - CARBIDE
TURNING TOOL HOLDER - ADJUSTABLE
UNIVERSAL TOOL HOLDER
INDEXABLE TOOL HOLDERS
QUICK ACTING KNURLING HOLDER
CARBON STEEL
H.S.S
CARBIDE TIPPED
MORSE
OVERALL LENGTH
KNURLING TOOL HOLDERS
CAT #
CAT #
CAT #
TAPER
INCH
MM
SPARE KNURLS GDC- 7842 GDC- 7849 GDC- 7849 MT - 0  2-7/8 73
BORING BAR WITH HOLDER GDC- 7843 GDC- 7850 GDC- 7850 MT - 1 3-5/16 84
BORING BAR - SINGLE ENDED GDC- 7844 GDC- 7851 GDC- 7851 MT - 2 4-3/16 104
BORING BAR - DOUBLE ENDED GDC- 7845 GDC- 7852 GDC- 7852 MT - 3 5-1/4 133
CALIBERATED BORING BAR GDC- 7846 GDC- 7853 GDC- 7853 MT - 4 6-1/2 165
LATHE BORING TOOL
GDC- 7847
 GDC- 7854 GDC- 7854 MT - 5 8 203
FLY TOOL CUTTER HOLDER GDC- 7848 GDC- 7855 GDC- 7855 MT - 6 10-5/8 270
FLY TOOL CUTTER - R8            
CIRCULAR SAW HOLDERS       
SLOTTING SAW ARBOR
* Solid construction with no moving parts and fully hardened.
DRILL CHUCK ARBOR
* Tip hardened to 60-63 HRC and included angle at tip is 60°.
STRAIGHT SHANK ARBOR
* Hardened high speed centers ensure long life.
BLANK END ARBOR
* Carbide tipped centers give longer tool life & require less grinding.
DRILL CHUCK ARBOR - R8
* Covers widest range of center hole sizes.
CIRCULAR SAW HOLDER - R8
* Eliminates special centers.
CIRCULAR SAW HOLDER
* Point angle - 60.
MINI TAP WRENCH  
ADJ. TAP & REAMER WRENCH  
AD. TAP & REAMER WRENCH - ECONOMY  
ADJ. TAP & REAMER WRENCH - D/Forged  
RATCHET T-TAP WRENCH
T-TAP WRENCH - REPLACEABLE JAWS
T-TAP WRENCH - SOLID JAWS  
T-TAP WRENCH - LONG HANDLE  
T-TAP WRENCH - PILOT SPINDLE      
T-TAP WRENCH HOLDER - REVERSIBLE     
TAP EXTENSION  
SELF ALIGNING TAP & REAMER HOLDER  
ROUND DIE HANDLE  
FLOATING ROUND DIE HOLDER  
DIE ADAPTORS
MACHINE HAND TAP GUIDE  
TAP GUIDE - SPRING CENTERED  
TAP GUIDE - KNURLED BODY  
DRILL STOP SET
DRILL STANDS  
DRILL SLEEVES / REDUCTION SLEEVES  
SOLID SOCKETS  
EXTENSION SLEEVES  
MORSE TAPER ADAPTORS - R8  
LATHE CENTER / DEAD CENTER FULL  
LATHE CENTER / DEAD CENTER HALF  
REVOLVING CENTER
REVOLVING CENTER - TRIPLE BEARING  
REVOLVING CENTER - 7 TIPS
BEVEL REVOLVING PIPE CENTERS  
BEVEL REVOLVING TUBE CENTERS  
LATHE DOGS / LATHE CARRIER  
GRINDING DOGS  
EJECTING DRILL DRIFT  
LATHE CHUCK KEYS  
7Pc UNIVERSAL JACK SCREW SET  
MINI JACK  
T SLOT CLEANER  
ADJUSTABLE MILL STOP  
VISE STOP  
QUILL STOP FOR MILLING MACHINES  
DRILL CHUCKS  
G-CLAMPS - MALLEABLE  
G-CLAMPS / DROP FORGED  
TOOLMAKERS PARALLEL CLAMP  
PLATE BENCH SHEAR  
BORING HEADS  
INTEGRATED BORING HEAD R-8 SHANK  
SPARE SHANK FOR BORING HEADS  
ARBOR NT SHANK  
ADAPTOR NT SHANK  
END MILL HOLDER NT SHANK  
R8 COLLETS  
SHELL END MILL ARBORS  
DRILL CHUCK ADAPTORS  
SIDE LOCK HOLDER BT SHANK  
FACE MILL ARBOR  
MT ADAPTORS  
3 JAW SELF CENTERING CHUCKS  
4 JAW INDEPENDENT LATHE CHUCKS  
VALVE SEAT & FACE CUTTERS  
SHORT DRIVE PIN PUNCHES  
LONG DRIVE PIN PUNCHES  
CENTER PUNCH - SQ HEAD  
CENTER PUNCHES - ROUND HEAD  
NAIL PUNCHES - SQ. HEAD  
NAIL PUNCHES - ROUND HEAD  
PARALLEL PIN PUNCHES SHORT  
PARALLEL PIN PUNCHES - LONG  
TRANSFER PUNCH  
UNIVERSAL TRANSFER & ALIGNER  
AUTOMATIC CENTER PUNCHES  
OPTICAL CENTER PUNCH  
DRIVE PIN PUNCH - BRASS  
LETTER & FIGURE PUNCH  
HOLLOW PUNCH MULTI PURPOSE  
HOLLOW PUNCH / BELT PUNCH  
13Pc COMBINATION PIN PUNCH SET  
13Pc UTILITY PUNCH SET  
14Pc D.I.Y PUNCH SET  
17Pc ALL PURPOSE PUNCH SET  
COLD CHISELS  
PUNCH & CHISEL SETS  
BRASS CHISEL - NON SPARKING  
REPAIRMANS TAPER REAMER  
SCRAPPER & DEBURRING TOOL  
ENGINEERS BEARING SCARPPER  
TRIANGULAR SCRAPPER