<< Click Here to Go to Picture View Page >>
BRAZED CARBIDE LATHE TURNING TOOLS
BRAZED CARBIDE BORING BAR SETS
HSS LATHE TURNING TOOLS
HSS INVOLUTE GEAR CUTTERS
5% Co. BORING BARS
BRAZED CARBIDE BORING BARS
TURNING TOOL HOLDERS - AMERICAN
TURNING TOOL HOLDERS - ENGLISH
PARTING / CUT OFF HOLDERS
TURNING TOOL HOLDER - CARBIDE
TURNING TOOL HOLDER - ADJUSTABLE
UNIVERSAL TOOL HOLDER
INDEXABLE TOOL HOLDERS
QUICK ACTING KNURLING HOLDER  
CAT #
DESC.
 SHANK SIZE    
KNURLING TOOL HOLDERS   GBB-7657 9Pc Set 3/8"    
SPARE KNURLS   GBB-7658 9Pc Set 1/2"    
BORING BAR WITH HOLDER   GB-7659 12Pc Set 5/8"    
BORING BAR - SINGLE ENDED   GBB-7660 12Pc Set 3/4"    
BORING BAR - DOUBLE ENDED   GBB-7661 7Pc Set 1"     
CALIBERATED BORING BAR            
LATHE BORING TOOL            
FLY TOOL CUTTER HOLDER            
FLY TOOL CUTTER - R8            
CIRCULAR SAW HOLDERS            
SLOTTING SAW ARBOR * Proper brazing is done of the carbide tips to avoid chipping and breaking while the tool is in use.
DRILL CHUCK ARBOR * Tool life is extended because each bar has far more steel behind the cutting edge for heavier, chatter free cut.
STRAIGHT SHANK ARBOR * The same bars can bore flat-bottom holes.
BLANK END ARBOR * The shanks are grounded.
DRILL CHUCK ARBOR - R8 *The massive head is behind the cutting edge promotes rigidity & long life by reducing vibration.
CIRCULAR SAW HOLDER - R8 * Set supplied in fine finished wooden stand.
CIRCULAR SAW HOLDER  
MINI TAP WRENCH  
ADJ. TAP & REAMER WRENCH
AD. TAP & REAMER WRENCH - ECONOMY  
ADJ. TAP & REAMER WRENCH - D/Forged  
RATCHET T-TAP WRENCH  
T-TAP WRENCH - REPLACEABLE JAWS  
T-TAP WRENCH - SOLID JAWS  
T-TAP WRENCH - LONG HANDLE  
T-TAP WRENCH - PILOT SPINDLE  
T-TAP WRENCH HOLDER - REVERSIBLE  
TAP EXTENSION  
SELF ALIGNING TAP & REAMER HOLDER  
ROUND DIE HANDLE  
FLOATING ROUND DIE HOLDER  
DIE ADAPTORS  
MACHINE HAND TAP GUIDE  
TAP GUIDE - SPRING CENTERED  
TAP GUIDE - KNURLED BODY  
DRILL STOP SET  
DRILL STANDS  
DRILL SLEEVES / REDUCTION SLEEVES  
SOLID SOCKETS  
EXTENSION SLEEVES  
MORSE TAPER ADAPTORS - R8  
LATHE CENTER / DEAD CENTER FULL  
LATHE CENTER / DEAD CENTER HALF  
REVOLVING CENTER  
REVOLVING CENTER - TRIPLE BEARING  
REVOLVING CENTER - 7 TIPS  
BEVEL REVOLVING PIPE CENTERS  
BEVEL REVOLVING TUBE CENTERS  
LATHE DOGS / LATHE CARRIER  
GRINDING DOGS  
EJECTING DRILL DRIFT  
LATHE CHUCK KEYS  
7Pc UNIVERSAL JACK SCREW SET  
MINI JACK  
T SLOT CLEANER  
ADJUSTABLE MILL STOP  
VISE STOP  
QUILL STOP FOR MILLING MACHINES  
DRILL CHUCKS  
G-CLAMPS - MALLEABLE  
G-CLAMPS / DROP FORGED  
TOOLMAKERS PARALLEL CLAMP  
PLATE BENCH SHEAR  
BORING HEADS  
INTEGRATED BORING HEAD R-8 SHANK  
SPARE SHANK FOR BORING HEADS  
ARBOR NT SHANK  
ADAPTOR NT SHANK  
END MILL HOLDER NT SHANK  
R8 COLLETS  
SHELL END MILL ARBORS  
DRILL CHUCK ADAPTORS  
SIDE LOCK HOLDER BT SHANK  
FACE MILL ARBOR  
MT ADAPTORS  
3 JAW SELF CENTERING CHUCKS  
4 JAW INDEPENDENT LATHE CHUCKS  
VALVE SEAT & FACE CUTTERS  
SHORT DRIVE PIN PUNCHES  
LONG DRIVE PIN PUNCHES  
CENTER PUNCH - SQ HEAD  
CENTER PUNCHES - ROUND HEAD  
NAIL PUNCHES - SQ. HEAD  
NAIL PUNCHES - ROUND HEAD  
PARALLEL PIN PUNCHES SHORT  
PARALLEL PIN PUNCHES - LONG  
TRANSFER PUNCH  
UNIVERSAL TRANSFER & ALIGNER  
AUTOMATIC CENTER PUNCHES  
OPTICAL CENTER PUNCH  
DRIVE PIN PUNCH - BRASS  
LETTER & FIGURE PUNCH  
HOLLOW PUNCH MULTI PURPOSE  
HOLLOW PUNCH / BELT PUNCH  
13Pc COMBINATION PIN PUNCH SET  
13Pc UTILITY PUNCH SET  
14Pc D.I.Y PUNCH SET  
17Pc ALL PURPOSE PUNCH SET  
COLD CHISELS  
PUNCH & CHISEL SETS  
BRASS CHISEL - NON SPARKING  
REPAIRMANS TAPER REAMER  
SCRAPPER & DEBURRING TOOL  
ENGINEERS BEARING SCARPPER  
TRIANGULAR SCRAPPER