CUT-OFF TOOL HOLDERS / PARTING TOOL HOLDERS
Rating
Views:1693
- Supplied in three shapes; Straight, Left & Right Hand.
- Manufactured from fine quality special steel, Hardened & Ground and finely blackodized
- Supplied with one key & bolt but without tool bit
- Groves are properly manufactured to avoid play & breakage of blades.
- Very useful tool for European & English Lathes.
Straight | Holder Size | Suitable Tool Bit | |||
Cat No. | Inch | mm | Inch | mm | |
GHT-7345 | 5/16x9/16x3-1/2 | 8 x 14 x 90 | 1/16x 5/16 | 1.58x 7.93 | |
GHT-7346 | 5/16x3/ 4x4-1/2 | 8 x 14 x 114 | 3/32x 1/2 | 2.38x 12.7 | |
GHT-7347 | 3/8x7/ 8x5 | 9.5 x 22 x 127 | 3/32x 5/8 | 2.38x 15.87 | |
GHT-7348 | 1/2x1-1/ 8x6 | 13 x 28 x 152 | 1/8x 3/4 | 3.17x 19.05 | |
GHT-7349 | 5/8x1-3/ 8x7 | 16 x 35 x 178 | 1/8x 7/8 | 3.17x 22.22 | |
GHT-7350 | 3/4x1-5/ 8x8 | 19 x 41 x 203 | 3/16x 1 | 4.76x 25.4 | |
GHT-7351 | 7/8x1-3/ 4x9 | 22 x 44 x 228 | 3/16x 1-1/8 | 4.76x 28.57 | |
GHT-7352 | 1x2x10 | 25 x 50 x 250 | 1/4x 1-1/4 | 6.35x 31.75 | |
* Please choose products to be added to info cart
© Copyright 2023 RAVI International – GARVIN TOOLS® All rights reserved.